Offset Fold-Away
Bruno's Offset Fold-Away personal lift eliminates the struggle of taking apart your trunk lift. The effort to lift the mast is a mere two pounds. It uses dual-spring assist and color-keyed hand-holds to make it so easy, almost anyone can do it!

The offset design feature, in combination with Bruno's industry-leading adjustable low-profile outer arm, gives you the flexibility to load a partially-assembled scooter from the driver side, behind the vehicle or from the curb side.

Bruno's new Offset Fold-Away lift is engineered to operate with an ergonomic pendant built into the outer lift arm.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Scooter Lift Jr.
The Scooter Lift Jr. personal lift is electrically powered from the vehicle's battery. Simply press a button on the controller and the Scooter Lift Jr. raises and lowers your scooter, effortlessly. Bruno's Scooter Lift Jr. can be adapted to operate in station wagons and hatchbacks. This versatility can provide a significant benefit when a new vehicle purchase is not in your budget. Bruno's Scooter Lift Jr. can end the struggle of manually trying to lift and store a scooter in the trunk or hatch opening of your vehicle.

The Scooter-Lift Jr. gives you the convenience you need to transport your scooter, and the freedom to travel when and where you want to. The Scooter Lift Jr. was designed to help raise and store three wheeled scooters in most auto trunks, station wagons, or hatchbacks, as long as the opening is large enough to accept the partially disassembled scooter and compact lift. The Scooter Lift Jr. is also available with the added option of a spring-assist feature. This further reduces the effort needed to raise and lower the lift arm before and after use.

Big-Lifter
The Bruno Big-Lifter is electrically powered from the vehicle's battery. Simply press a button on the controller and the Big-Lifter raises and lowers your fully assembled power chair weighing up to 300 pounds, allowing you to manually swing it in or out of the vehicle. Minimum strength is required.

The Bruno Big-Lifter manual swing has a low resistance design that is easy to swing in and out, and comes complete with a lifting device designed specifically for the power chair.

The Bruno Big-Lifter is a fully adjustable lift that can be installed in just a few hours and requires no structural modification to the vehicle.

The Bruno Big-Lifter securely stores your scooter or power chair in the rear of most vans, minivans, and sport utility vehicles: positioned behind the rear seat.

Out-Sider III Power Chair Lift
The Out-Sider III© is easy to operate. Just turn the key and move the control lever to the position marked ARROW UP or ARROW DOWN. The unit automatically lifts and lowers the power chair. The chair is then securely held with a unique 4 point color coded strap system.

The Out-Sider III can raise and store power chairs weighing up to 300 lbs using a Class III hitch with a 2" receiver. The Out-Sider III system is superior to any other rear exterior lift. The unit is powder coated and assembled with stainless steel fasteners for long life. In addition to these features, a special weight sensing device determines if there is a power chair on the platform and will fold the lift into the storage position when empty.

Bruno's Out-Sider III features an ON-OFF key for greater security, and an automatic emergency safety latch prevents the platform from lowering. As a result, the Out-Sider III gives you an easy to use, secure way to transport your power chair.

The Out-Sider III is powered by your vehicle's battery and is delivered fully equipped, including a lighted license plate holder, reflectors, and a center brake light for added safety.

AWL-100
The Wheelchair-Lifter raises and tilts your wheelchair horizontally, all at the touch of a button. You don't need to struggle any longer to get your wheelchair in and out of the trunk of your car. Bruno's Wheelchair-Lifter can also be adapted as the Model AWL-150 to raise your wheelchair vertically for storage in a full size van or minivan.

The Wheelchair-Lifter is an electrically operated lift that draws its power from the vehicle's battery. Raising and lowering the wheelchair is as easy as touching a button. When the wheelchair is above the trunk, simply swing the lift arm in and push the DOWN button, then fold the lift arm down. Bruno's Wheelchair-Lifter raises and stores your wheelchair in just a few seconds. No more struggling and awkward lifting. The work is done for you.

The Wheelchair-Lifter can be installed in most auto trunks, station wagons, vans, minivans, sport utility vehicles, and hatchbacks as long as the storage area is large enough to accommodate your folding wheelchair.

Bruno's Wheelchair-Lifter is a cost efficient way of loading and unloading your manual folding wheelchair into the back of your vehicle.

Cab-Sider PUL-1700
The Cab-Sider gives you the advantage of driving a pickup while being able to store your chair inside, out of the weather. The truck bed is free to use for other things and can even be equipped with a cap, if desired.

Bruno's Cab-Sider is compact enough to allow small items or soft luggage to be placed in the cab area when the chair is stored. Simple installation means easy removal when it comes time to trade in your vehicle.
The Cab-Sider is simple to operate. This easy to use wheelchair lift is electrically powered. All you need to do is roll the chair next to the vehicle, transfer, and then use the hand-held controller to do the rest. Unloading the chair is just as simple and trouble-free.

Bruno also offers the EZ RIZER seat lift system to assist wheelchair users that may find it difficult to transfer into and out of full-size trucks. Call Bruno's Technical Applications Department for additional information.

The Cab-Sider is available for any full size or compact truck that features an extended cab with a fourth door. This includes Dodge Ram, Chevy S-10, Chevy C/K, Silverado, GMC Sonoma, GMC Sierra, and the Ford F-150, F-250 and F-350.

Space-Saver
The Space-Saver is a take-apart lift that solves the problem of storing a scooter in smaller vehicles with limited trunk space. The Space-Saver fits closer to the interior trunk wall providing a tighter arc when manually swinging the scooter in and out of the trunk. This allows scooters to be stored in spaces that won't work with more conventional lift designs, and the rotation of the lift arm makes it possible to raise and lower the scooter at the rear or side of the vehicle.

The Space-Saver can be stored anywhere, in the trunk or inside the vehicle itself. And when an additional tower base installation kit is ordered, the lift can be used in more than one vehicle. Contact Bruno's Technical Application Department.

The Space-Saver is fully adjustable for height and length and can raise scooters weighing up to 180 lbs (82 kgs). The lift's tower base can be easily adjusted to fit nearly any car's trunk, ensuring a useful, reliable installation.
The Space-Saver is lightweight and assembly and disassembly can be completed in three simple steps, quickly and easily.

Scooter-Lift Sr.
The Scooter Lift Sr. is electrically powered from the vehicle's battery. Simply press a button on the controller and the Scooter Lift Sr. raises and lowers your scooter, allowing you to manually swing it in or out of the vehicle.

The Scooter Lift Sr. is also available as the VSL-560, featuring Bruno's exclusive patented adjustable sub-base. The adjustable sub-base fits most vans, adds stability, is compact and allows for faster, simpler installation.

Bruno's Scooter Lift Sr. can end the struggle of manually trying to lift and store a scooter in your van or minivan. The Scooter Lift Sr. gives you the convenience you need to transport your scooter and the freedom to travel when and where you like.

The Bruno Scooter Lift Sr. makes taking your scooter with you simple and easy. No need to remove and store the seat, and our custom manufactured C-Arm and T-Bar Docking Device allow you to raise your scooter at the touch of a button. The Scooter-Lift Sr. is also available with the added option of a spring-assist feature. This reduces the effort needed to raise and lower the lift arm before and after use.

Curb-Sider
Bruno's Curb-Sider can end the struggle of trying to manually lift and store a scooter in your van or minivan. The Bruno Curb-Sider was designed to fit most types of vans, minivans, sport utility vehicles, and pickups with caps. Plus, the Curb-Sider can be adapted for use with some types of power wheelchairs, increasing its versatility.

The Curb-Sider lift is electrically powered from the vehicle's battery. Simply press a button on the hand-held controller, and the Curb-Sider raises and lowers any scooter weighing up to 200 lbs, effortlessly.

Bruno's Curb-Sider provides a unique 180 degree powered rotation, which makes it possible to raise, lower and rotate a fully assembled scooter on the curb, at the side of your vehicle, or directly behind it. The Curb-Sider's rotation feature allows it to stow scooters in vehicles with tailgates.

The lift arm can be folded vertically when not in use and installation does not require any structural modifications to your vehicle.

Curb-Sider Super XL
The Curb-Sider Super XL lift is electronically powered from the vehicle's battery. Simply press a button on the hand-held controller and the Curb-Sider Super XL raises and lowers your power chair.

Bruno's Curb-Sider Super XL provides up to 180 degrees of powered rotation, which makes it easy to raise, lower and rotate a fully or partially assembled scooter or power chair on the curb at the side of your vehicle or directly behind it.

Bruno's Curb-Sider Super XL can end the struggle of manually trying to lift and store a scooter or power chair in your vehicle. The Curb-Sider Super XL gives you the convenience you need to transport your power chair or scooter and the freedom to travel where you like.

The Bruno Curb-Sider Super XL is designed to fit most types of full size vans, as well as minivans, sport utility vehicles, pickup truck, and some station wagon applications.

The Bruno Curb-Sider Super XL is equipped with a low profile lift arm with angle adjustment that allows the placement of larger power bases into smaller vehicle openings. The installation does not require any structural modifications to your vehicle. A custom base is included to provide a neater and easier installation.

AWL-150
The lift and wheelchair fit snugly in your van. In some instances, rear seats may remain in the van. You don't need to struggle any longer to get your wheelchair in and out of your van or minivan. The Wheelchair-Lifter Model AWL-150 raises a wheelchair vertically into the rear door of your full-size van or minivan, all at the touch of a button. Plus, Bruno's Wheelchair-Lifter Model AWL-100 can lift and store your wheelchair into the trunk of a car.

Bruno's Wheelchair-Lifter raises and stores your wheelchair in just a few seconds. No more struggling and awkward lifting. The lift does the work for you. The Wheelchair-Lifter is an electrically-operated lift that is powered off the vehicle's battery. When the wheelchair is next to the bumper, easily attach the chair to the lift's docking device and push the UP button to raise the wheelchair above the bottom of the door opening. Then, simply swing the lift arm and wheelchair into the vehicle and push the DOWN button—it is as simple as that.

The Wheelchair-Lifter Models AWL-150 can be installed in most full-size vans and minivans as long as the storage area is large enough to accommodate your folding wheelchair.

Bruno's Wheelchair-Lifter is a cost-efficient way of loading and unloading your manual folding wheelchair into your vehicle.

Back-Saver AWL-1600
The Back-Saver is simple to operate and does not require any manual lifting. Just fold the chair up and roll the chair onto the platform. Turn the key to the ON position and depress the rocker switch to the UP position. Unloading the chair is just as simple and trouble free.
The Back-Saver is rated to handle most folding wheelchairs with 22-inch or larger rear wheels, weighing 70 lbs or less.

Bruno's Back-Saver will fit a standard Class I hitch tongue or a Class II or Class III if an adapter is used. And the Back-Saver features a strong tubular frame, for structural rigidity and long term durability.

A self-locking hold-tight bar is an integral part of the Back-Saver and is designed to grip the chair firmly during transport, without marring its finish. In addition, the Back-Saver meets state and federal D.O.T. regulations for license plate illumination and visibility. The Back-Saver also includes an extra brake light for security and peace of mind.

Offset Space-Saver
The Offset Space-Saver from Bruno gives you the flexibility to load a partially assembled scooter in the trunk of today's smaller cars. The unique offset design of the lift arm allows you to position your scooter inside narrow trunk openings. The Offset Space-Saver permits lift installations for vehicles with trunks that previously were considered too small. This means that you don't have to purchase a different type of car. And it means you don't have to go without the benefit of a lift any longer.

The Offset Space-Saver is designed with a low-profile outer arm lift assembly to make storing your scooter even easier. All controls are located conveniently on top of the lift arm. Just press a button and the Offset Space-Saver eliminates the struggle of raising and lowering your scooter.

The Offset Spacer-Saver can be stored anywhere, in the trunk or inside the vehicle. It disassembles quickly and easily, requiring only three steps. When an additional tower base assembly is ordered, it can even be used in more than one vehicle. Contact Bruno's Technical Application Department for installation details.

The Offset Space-Saver can raise and store many types of three-wheel scooters weighing up to 180 lbs, with either front or rear drive.

Out-Sider III Scooter Lift
The Out-Sider III© is simple to operate. Just turn the key and move the control lever to the position marked ARROW UP or ARROW DOWN. The unit automatically lifts and lowers the scooter, as well as raising and lowering the hold-tight lock-down mechanism. The Out-Sider III can raise and store 3 or 4 wheel scooters weighing up to 300 lbs, using a Class III hitch with a 2" receiver. The Out-Sider III system is fully automatic and is superior to any other rear exterior lift. The unit is powder coated and assembled with stainless steel fasteners for long life. In addition to these features, a special weight sensing device applies exactly the right amount of pressure to the hold-tight device to secure the scooter. Bruno's Out-Sider III features an ON-OFF key for greater security, and an automatic emergency safety latch prevents the platform from lowering. As a result, the Out-Sider III gives you an easy to use, secure way to transport your scooter. The Out-Sider III is powered by your vehicle's battery and is delivered fully equipped, including a lighted license plate holder, reflectors and a D.O.T. approved center brake light for added safety.

Scooter Lift II
The Scooter-Lift II can raise and store a fully assembled scooter or wheelchair through the driver's or passenger's side sliding door of minivans, and passenger side doors of full size vans.

The Scooter-Lift II requires very little arm strength, balance, or effort to use. It is so compact that even in a minivan there is still enough room for three passengers to sit comfortably in the rear seat. With scooter removed, or when traveling without the scooter, entry and exit is easy since the door opening remains unobstructed.

Bruno's Scooter-Lift II also features an optional installation assembly that eliminates drilling any holes in the floor of the vehicle. This means easier removal when it comes time to transfer the lift in and out of a minivan. Contact Bruno's Technical Applications Department about specific applications for this system.

The Scooter-Lift II can be used for either three or four wheel scooters and manual folding or power wheelchairs weighing up to 200 lbs (91k). The Scooter-Lift II's hand-held controller makes this lift simple and easy to use. The Scooter-Lift II uses electrical power from the vehicle's battery and all lift operations are automatic. You only need to help guide the scooter or wheelchair into place.

Curb-Sider Super XL3
The BRUNO VSL-690 CURB-SIDER SUPER XL3 is a lift for the rear of minivans, full-size vans, sport utility vehicles and station wagons.
The Bruno VSL-690 Curb-Sider Super XL3 3-axis control unit allows wider and larger scooters, power wheelchairs, and equipment to fit into smaller vehicle openings like the new 2001 Daimler Chrysler minivan (with a power hatch).

This unique new lift is easy to operate with an ergonomic control pendent and can lift up to 400 lbs. A 200 lb lifting capacity version for smaller vehicles such as the Daimler Chrysler PT Cruiser is available.

AWL-160
The lift and wheelchair fit snugly in your van. In some instances, bucket or rear-seats may remain in the van. You don't need to struggle any longer to get your wheelchair in and out of your van or minivan. The Wheelchair-Lifter Model AWL-160 raises a wheelchair vertically into the side door of your minivan, all at the touch of a button. Plus, Bruno's Wheelchair-Lifter Model AWL-100 can lift and store your wheelchair into the trunk of a car.

Bruno's Wheelchair-Lifter raises and stores your wheelchair in just a few seconds. No more struggling and awkward lifting. The lift does the work for you. The Wheelchair-Lifter is an electrically-operated lift that is powered off the vehicle's battery. When the wheelchair is next to the bumper or side door, easily attach the chair to the lift's docking device and push the UP button to raise the wheelchair above the bottom of the door opening. Then, simply swing the lift arm and wheelchair into the vehicle and push the DOWN button—it is as simple as that.

The Wheelchair-Lifter Models AWL-160 can be installed in most minivans as long as the storage area is large enough to accommodate your folding wheelchair.

Bruno's Wheelchair-Lifter is a cost-efficient way of loading and unloading your manual folding wheelchair into your vehicle

Out-Rider PUL-1100
The Out-Rider will add a new dimension to your lifestyle. The hand-held controller is simple and easy to operate. Just press a button and the Out-Rider does the rest.

Bruno also offers the EZ RIZER seat lift system to assist wheelchair or scooter users who may find it difficult to transfer into and out of full size trucks or 4x4's. Plus, Bruno's POW'R TOPPER covers your scooter or wheelchair in the truck's bed.

Call Bruno's Technical Applications Department for additional information about other great products.

The Out-Rider can be installed behind the cab on either the driver's or passenger's side of the truck. It is fully automatic and draws its power from the vehicle's battery. No welding is required and the unit is completely weatherized.

Accessible Vans |  Wheelchairs & Scooters | Lifts & Carriers |  Pride Power Scooters | Quickie Wheelchairs | Jazzy Wheelchairs | Invacare Power Wheelchairs | Permobil Wheelchairs | Kuschall Wheelchairs | EZ Lock | Left Foot Gas Pedal | MPS Hand Controls | Ricon 6-way Power Transfer Seat | Bruno Personal Lift and Carriers | Bruno Turny Seats  | Braun Platform Lifts  | Ricon Platform Lifts | VMI Personal Lifts and Carriers | Wheelchair Vans | Used Pre-Owned Wheelchair Vans | 2008 Wheelchair Vans | Handicap Vans